White Integrated LED Flat Panel Light 2 ft. x 2 ft.

The Metalux RT is a DLC certified LED flat panel light that combines great performance with architectural appeal. The RT is made from a steel housing, trim, UV and impact resistant frosted lens. At 36W it provides 4200 (2x2) lumens. The RT panel delivers long-lasting illumination and replaces up to 96W fluorescent lamps. The LED panel light is optimized for shallow plenum grid ceilings with less than 2’’ height. The RT has a 120-277V, Class A 0-10V dimming driver. This shallow panel can be installed in grid ceilings or surface and suspended applications using an accessory kit. The visual optics, light guide and integrated grid retention clips provide the features needed for flexibility and speedy installation. The RT panel light is ideal and excellent lighting solution for home office, light commercial, schools, basements and retail spaces.

  • 4200 lumens at 36W power and replaces up to 96W fluorescent lamps
  • Steel housing with UV and impact resistant frosted lens provides even, uniform illumination
  • Shallow plenum design fits any ceiling type,
  • Low-voltage 0-10V dimming requires grey and purple wires from light fixture to 0-10V dimmer switch
  • 120-277V FCC class A electronic driver
  • Comes with Integral grid locking clips for added safety
  • Suspension clips are provided for installation flexibility
  • Ideal for home, offices, commercial, schools, basements and retail spaces
  • L70 at 60,000 rated life-hours
  • DLC and UL listed suitable for Damp location

White Integrated LED Flat Panel Light 2 ft. x 2 ft.

SKU: 364215375135191
$250.00Price
  • Certain fixtures use non-acrylic materials in light guides or lenses that may naturally shift color or yellow over time, such as polystyrene. The warranty applicable to these fixtures does not cover against yellowing or color shifting in light guides or lenses using these materials and Eaton disclaims all warranties, express and implied, with respect to yellowing or color shifting of such light guides and lenses. 11 Subject to all the limitations set forth in Eaton’s Domestic USA General Terms and Conditions of Sale, and Pole Limited Warranty. 10 Subject to all the limitations set forth in Eaton’s Domestic USA General Terms and Conditions of Sale, and Ephesus Fixture Limited Warranty. 1 Ungrounded or Improperly grounded systems not in compliance with current NEC code are excluded from Cooper Lighting Solutions warranty of LED products. 2 1 Yr (Greengate, iLumin and Fifth Light Software), 5 Yr (Occupancy Sensors, Room Controller and iLumin), 10 Yr (relay cards), All other products (3 years) 3 5 Yr (Linear Products, Luxrail - fixtures only), 10 Yr (Koi - wood warranty) 4 HALO, HALO Commercial CFL recessed lighting products, Portfolio and All-Pro CFL recessed lighting products – as registered in the ENERGY STAR “Qualified Products List”; the limited warranty set forth shall have a period of 3 (three) years from the date of shipment of the products. 9 Subject to all the limitations set forth in Eaton’s Domestic USA General Terms and Conditions of Sale, Failsafe F6MRI (LED Housings, LED Modules and LED Trims) and Failsafe Circadian LED, the limited warranty set forth shall have a period of 3 (three) years from the date of shipment of products. 5 Subject to all of the limitations set forth in Eaton’s Domestic USA General Terms and Conditions of Sale, for Eaton Outdoor Light Emitting Diode (LED) luminaires only, Eaton warrants to the original purchaser that the factory-installed electrical system will be free from defects in material and workmanship for 5 years from the date of shipment of the products. If 10% of the individual LEDs (light sources) should fail within 5 years of shipment Eaton will, at its sole option, ship a repaired or replacement fixture EXW (Incoterms 2000) Eaton’s factory. The warranty does not cover failures due to abnormal site conditions. These abnormal conditions include, but are not limited to, under/over voltage, under/over current, excessive switching and excessive ambient temperatures. Subject to all of the limitations set forth in Eaton’s Domestic USA General Terms and Conditions of Sale, Outdoor Light Emitting Diode (LED) luminaires only, Cooper Lighting Solutions warrants to the original purchaser finish for a period of 5 years from date of shipment. Eaton will, at its sole option, repair or replace the defective finish if it exhibits cracking, peeling, excessive fading or corrosion defects during the warranty period. During the warranty period some fading, staining or chalking may occur. This is normal aging for the finish used, is not a manufacturing defect, and is not covered by our warranty. Subject to all limitations set forth in Eaton’s Domestic USA General Terms and Conditions of Sale, for Eaton Poles and Lighting Standards, only, this warranty specifically excludes pole failure resulting from a third party act on omission, misuse, unanticipated use, fatigue, failure, or similar phenomena resulting from induced vibration, harmonic oscillation, or resonance from air current movement around the product. This warranty specifically excludes poles installed without the luminaires or with unapproved devices such as banners, pennants, cameras, or signs for which the pole was not designed. Use of such accessories may result in injury death or property damage. This warranty specifically excludes poles using pore-existing anchor bolts, or bolt adaptors not supplied by Eaton. It also excludes issues related to foundation or said conditions at the installation site. Subject to all limitations set forth in Eaton’s Domestic USA General Terms and Conditions of Sale, for Eaton High Intensity Discharge luminaires only, supplied with a core & coil electrical system manufactured by Eaton, Eaton warrants that the factory-installed electrical system, consisting of an Eaton core & coil ballast, igniter (if applicable), capacitor, socket and wiring, will be free from defects in material and workmanship for 5 years from the date of shipment of products. Finishes, housings, lenses and any other component not specifically mentioned in the preceding sentence are not included in the 5-year limited warranty. If a covered component in a covered Eaton fixture fails to meet this warranty, Eaton will, at its sole option, ship a repaired or replacement component EXW (Incoterms 2000) Cooper’s factory. 6 Subject to all limitations set forth in Eaton’s Domestic USA General Terms and Conditions of Sale, for SURE-LITES lead-acid battery products, the limited warranty set forth shall have a period of 5 years pro-rata from the date of shipment of products. Subject to all of the limitations set forth in Eaton’s Terms and Conditions of Sale, for SURE-LITES nickel-cadmium battery products, the limited warranty set forth shall have a period of 7 years pro-rata from the date of shipment of products. 7 Subject to all the limitations set forth in Eaton’s Domestic USA General Terms and Conditions of Sale, LED products in the following brands - Halo Recessed, Halo Track, Halo Commercial Recessed, IRIS, Metalux Commercial, Metalux Specification, Metalux Industrial, Metalux All-Pro, Fail-Safe, Corelite, and RSA products, the limited warranty set forth shall be a period of 5 years from the date of shipment of products. Specifically the light engine comprised of LEDs and driver or drivers. All other mechanical components and hardware are covered for 1 year. 8 Subject to all the limitations set forth in Eaton’s Domestic USA General Terms and Conditions of Sale, All-Pro LED products, the limited warranty set forth shall have a period of 3 (three) years from the date of shipment of products.

Choose File